please help

FlashPro questions & answers specific to the 2006-2011 Americas Civic Si
Post Reply
chocolateman
Posts: 58
Joined: Sat Apr 23, 2022 1:00 pm

please help

Post by chocolateman »

hey everyone, I just got my flashpro and I have uploaded completely stock calibration and i am seeing a lot of knock. is that normal (fake knocks) or should I do something about it.

the only mod I have is hasport rear engine mount.

thanks
Attachments
dataloglaunch.fpdl
(200.51 KiB) Downloaded 61 times
chocolateman
Posts: 58
Joined: Sat Apr 23, 2022 1:00 pm

Re: please help

Post by chocolateman »

EFICU, i would appreciate your help :D

2011 civic si runs on 91 octane
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: please help

Post by EFICU »

Yeah it definitely has too much timing in a lot of areas. I put together a quick file for you to get started and hopefully get you out of the issues you're having. We can work on it some more, but for now, take this for a twenty minute datalog and get at least one third gear WOT pull from 2500-8600 so we can see the WOT fueling.
Chocolateman.Hybrid.Rev01 (Blended)(Vtec4800).fpcal
(23.14 KiB) Downloaded 67 times
chocolateman
Posts: 58
Joined: Sat Apr 23, 2022 1:00 pm

Re: please help

Post by chocolateman »

Thank you for replying:)
Will try it tomorrow and let you know
chocolateman
Posts: 58
Joined: Sat Apr 23, 2022 1:00 pm

Re: please help

Post by chocolateman »

hey EFICU,
here's 20 min drive
Attachments
datalog0011.fpdl
(2.96 MiB) Downloaded 57 times
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: please help

Post by EFICU »

Not too bad for a start, I went in and made some fuel and ignition adjustments as necessary. I also lowered vtec down to 4500, I think that might be a better fit to help get it out of the hole on those third gear pulls. Take this one for a spin when you can, same datalog and driving style.
Chocolateman.Hybrid.Rev02 (Blended)(Vtec4500).fpcal
(23.16 KiB) Downloaded 54 times
chocolateman
Posts: 58
Joined: Sat Apr 23, 2022 1:00 pm

Re: please help

Post by chocolateman »

alright will try right now
chocolateman
Posts: 58
Joined: Sat Apr 23, 2022 1:00 pm

Re: please help

Post by chocolateman »

here's 15 min drive
Attachments
datalog0012.fpdl
(2.34 MiB) Downloaded 63 times
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: please help

Post by EFICU »

It looks like I didn't save that last calibration properly, I changed the vtec RPM but it didn't save the fuel and ignition adjustments. Sorry about that, take this one for a drive when you can. We'll see how this one looks, it should be much closer now in this revision.
Chocolateman.Hybrid.Rev03 (Blended)(Vtec4500).fpcal
(23.29 KiB) Downloaded 55 times
chocolateman
Posts: 58
Joined: Sat Apr 23, 2022 1:00 pm

Re: please help

Post by chocolateman »

that's a quick drive
Attachments
datalog0014.fpdl
(2.33 MiB) Downloaded 48 times
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: please help

Post by EFICU »

Definitely looks a lot better now that the changes saved. Sorry about that, I made some more adjustments to the WOT fueling and some minor MAF scaling for the part throttle. Still chasing a little bit of knock, but we'll keep working on it. Take this one for a spin when you can, same datalog and driving style.
Chocolateman.Hybrid.Rev04 (Blended)(Vtec4500).fpcal
(23.33 KiB) Downloaded 57 times
chocolateman
Posts: 58
Joined: Sat Apr 23, 2022 1:00 pm

Re: please help

Post by chocolateman »

had some fun with this run :)
Attachments
datalog0015.fpdl
(2.7 MiB) Downloaded 60 times
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: please help

Post by EFICU »

It looks really good. I made a couple 1-2% adjustments to sooth my OCD, other than that it's pretty much there. We'll see how this one looks. For this next one, I added a different pedal map which control the relationship between the pedal and throttle body. See what you think on this one, we can always go back to my base pedal map. Take it for a spin and we'll see how it looks.
chocolateman
Posts: 58
Joined: Sat Apr 23, 2022 1:00 pm

Re: please help

Post by chocolateman »

car feels good with the new adjustment
Attachments
datalog0016.fpdl
(2.66 MiB) Downloaded 52 times
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: please help

Post by EFICU »

That's good. We're just about there, but some knock popped up. So I made some adjustments for that, everything else looked solid. Take this one for a drive when you can.
Post Reply