K24a2 swapped ep3 tune assist

K-Series Programmable ECU Calibration updates / downloads
Burgturdler
Posts: 34
Joined: Mon Mar 14, 2022 7:47 pm

Re: K24a2 swapped ep3 tune assist

Post by Burgturdler »

Saw a little more knockcount. Just letting you know its pretty hot and I had the AC on. I was able to fit my old exhaust with a high-flow cat as well. In case anything looks off.
Attachments
k24_EP3_log_12.kdl
(14.18 MiB) Downloaded 65 times
k24_EP3_log_11.kdl
(12.24 MiB) Downloaded 64 times
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: K24a2 swapped ep3 tune assist

Post by CalibratEd »

I reduced the timing where knock was present. Load the new file and create a normal driving datalog with 3 WOT pulls.

-Ed
Attachments
BurgturdlerRev5.kal
(21.55 KiB) Downloaded 65 times
Burgturdler
Posts: 34
Joined: Mon Mar 14, 2022 7:47 pm

Re: K24a2 swapped ep3 tune assist

Post by Burgturdler »

No knock events in the pulls. The three present very early on are in slow traffic.

Thanks
Attachments
k24_EP3_log_14.kdl
(7.5 MiB) Downloaded 67 times
k24_EP3_log_13.kdl
(8.65 MiB) Downloaded 59 times
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: K24a2 swapped ep3 tune assist

Post by CalibratEd »

We are moving to VTC 30. Create a normal driving log. Once I confirm fuel is fine we can move to WOT. I noticed the car knocked in the last datalog due to you reving it to high. You should not rev the car past 7400. You rev'd the car up to 8300. I move up the rev limit so that the car doen't cut fuel.

-Ed
Attachments
BurgturdlerRev6.kal
(19.73 KiB) Downloaded 69 times
Burgturdler
Posts: 34
Joined: Mon Mar 14, 2022 7:47 pm

Re: K24a2 swapped ep3 tune assist

Post by Burgturdler »

Updated log. Sorry, I wasn't paying attention to the RPM range as I was in the 7400 range at about 80mph so thats all I was looking at for the last log. I'll make sure to watch RPMs to be sure.
Attachments
k24_EP3_log_16.kdl
(17.75 MiB) Downloaded 65 times
k24_EP3_log_15.kdl
(15.53 MiB) Downloaded 66 times
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: K24a2 swapped ep3 tune assist

Post by CalibratEd »

Create a normal driving log with a 3 WOT pulls.

-Ed
Attachments
BurgturdlerRev7.kal
(20.2 KiB) Downloaded 70 times
Burgturdler
Posts: 34
Joined: Mon Mar 14, 2022 7:47 pm

Re: K24a2 swapped ep3 tune assist

Post by Burgturdler »

New logs. Idle felt funny initially, i checked for vacuum leaks or loose hose but didn't see any. Seemed to smooth out during the drive.
Attachments
k24_EP3_log_19.kdl
(9.13 MiB) Downloaded 65 times
k24_EP3_log_18.kdl
(10.45 MiB) Downloaded 62 times
k24_EP3_log_17.kdl
(11.04 MiB) Downloaded 65 times
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: K24a2 swapped ep3 tune assist

Post by CalibratEd »

Cleaned up some of the fuel. Create a normal driving log with a WOT Pull. If all is well we will move to VTC 40.

-Ed
Attachments
BurgturdlerRev8.kal
(21.57 KiB) Downloaded 61 times
Burgturdler
Posts: 34
Joined: Mon Mar 14, 2022 7:47 pm

Re: K24a2 swapped ep3 tune assist

Post by Burgturdler »

For your review. Thanks.
Attachments
k24_EP3_log_22.kdl
(15.2 MiB) Downloaded 62 times
k24_EP3_log_21.kdl
(13.83 MiB) Downloaded 59 times
k24_EP3_log_20.kdl
(12.72 MiB) Downloaded 55 times
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: K24a2 swapped ep3 tune assist

Post by CalibratEd »

Create a normal driving log with a few wot pulls.

-Ed
Attachments
BurgturdlerRev9.kal
(22.27 KiB) Downloaded 59 times
Burgturdler
Posts: 34
Joined: Mon Mar 14, 2022 7:47 pm

Re: K24a2 swapped ep3 tune assist

Post by Burgturdler »

Far less knock events. 5th gear moving in traffic feels much better with the latest revisions.I could only do 2 full WOT pulls. Last one was cut short. Thanks.
Attachments
k24_EP3_log_24.kdl
(15.68 MiB) Downloaded 57 times
k24_EP3_log_23.kdl
(14.38 MiB) Downloaded 59 times
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: K24a2 swapped ep3 tune assist

Post by CalibratEd »

Finishing up the non Vtec side and blending the VTC tables. Create a normal driving log with a WOT Pull.

-Ed
Attachments
BurgturdlerRev10.kal
(19.75 KiB) Downloaded 64 times
Burgturdler
Posts: 34
Joined: Mon Mar 14, 2022 7:47 pm

Re: K24a2 swapped ep3 tune assist

Post by Burgturdler »

Completed. Thanks.
Attachments
k24_EP3_log_26.kdl
(19.66 MiB) Downloaded 52 times
k24_EP3_log_25.kdl
(15.44 MiB) Downloaded 59 times
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: K24a2 swapped ep3 tune assist

Post by CalibratEd »

Moving to the Vtec side VTC 0. Create a normal driving log.

-Ed
Attachments
BurgturdlerRev11.kal
(20.55 KiB) Downloaded 62 times
Burgturdler
Posts: 34
Joined: Mon Mar 14, 2022 7:47 pm

Re: K24a2 swapped ep3 tune assist

Post by Burgturdler »

Sorry this log ended up being a little longer than normal. I ran into a ton of traffic and couldnt get to my computer to restart the log.
Attachments
k24_EP3_log_29.kdl
(19.57 MiB) Downloaded 61 times
k24_EP3_log_28.kdl
(18.7 MiB) Downloaded 61 times
k24_EP3_log_27.kdl
(19.55 MiB) Downloaded 51 times
Post Reply