Kpro V4 on “PPL” ecu

K-Series Programmable ECU installation questions / support issues
Post Reply
MT-Garage
Posts: 4
Joined: Mon Jun 06, 2022 4:52 am

Kpro V4 on “PPL” ecu

Post by MT-Garage »

58B7F34E-F5C5-4DA4-82E9-3A96D480ABC0.jpeg
58B7F34E-F5C5-4DA4-82E9-3A96D480ABC0.jpeg (236.51 KiB) Viewed 837 times
Hello,

I recently got a hondata Kpro V4 with a PPL ecu from an authorized dealer.

I am having issues on tuning my k24 with the cam degree? Everytime we just rev the car it shoots all the way to 26 and there is a P0010 VTC code.

I tried another Kpro V4 “PRB” with the same base map and everythingworks out perfectly with no issues

Thanks!
Attachments
7F45A34A-8AA3-4A31-86C5-286C30964DCD.jpeg
7F45A34A-8AA3-4A31-86C5-286C30964DCD.jpeg (217.79 KiB) Viewed 837 times
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Kpro V4 on “PPL” ecu

Post by Hondata »

What wiring is in use? 02-04 or 05-06? Has either ECU been prepared for 05-06?
Hondata
MT-Garage
Posts: 4
Joined: Mon Jun 06, 2022 4:52 am

Re: Kpro V4 on “PPL” ecu

Post by MT-Garage »

02-04 DC5 harness on an EG chassy
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Kpro V4 on “PPL” ecu

Post by Spunkster »

What is the serial number that is on the K-Pro board inside the ECU?
MT-Garage
Posts: 4
Joined: Mon Jun 06, 2022 4:52 am

Re: Kpro V4 on “PPL” ecu

Post by MT-Garage »

82F13530-4DE4-47DE-99F5-1F2AD6D910B8.jpeg
82F13530-4DE4-47DE-99F5-1F2AD6D910B8.jpeg (761.83 KiB) Viewed 823 times
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Kpro V4 on “PPL” ecu

Post by Spunkster »

It looks like this was sold as an install kit to Tri-State Performance LLC. I would recommend that you have them test this for you to see if it is working correctly. If the ECU is damaged you should be able to supply them a working ECU to have the K-Pro installed into.
MT-Garage
Posts: 4
Joined: Mon Jun 06, 2022 4:52 am

Re: Kpro V4 on “PPL” ecu

Post by MT-Garage »

Okay thanks, will just bring it back.

I bought the whole ECU kpro’d already from them.
Post Reply