car wont rev pass 2k while in gear but will stationary
car wont rev pass 2k while in gear but will stationary
car has a basic set up css ls vtev skunk 2 cams just recently switch over to Bosch 2200cc but car goes into like a decel mode and the datalog shows injector duty cycle go to 0ms car was working fine but no matter what deadtimes i use car has the same issue any help would be appreciated thank you
- Attachments
-
- injector issues.s3d
- (311.65 KiB) Downloaded 55 times
Re: car wont rev pass 2k while in gear but will stationary
Post a picture of your s300.
Re: car wont rev pass 2k while in gear but will stationary
Here is the picture thanks
- Attachments
-
- 20220718_212240.jpg (972.86 KiB) Viewed 722 times
Re: car wont rev pass 2k while in gear but will stationary
This also happened the last time i took the car out trying to tune
- Attachments
-
- Screenshot_20220718-212844_Facebook.jpg (868.6 KiB) Viewed 722 times
Re: car wont rev pass 2k while in gear but will stationary
The internal battery has most likely failed. The only option is to upgrade to the version 4 s300. Details and the form can be found at: https://www.hondata.com/downloads/s300v ... e_form.pdf