car wont rev pass 2k while in gear but will stationary

s300 and SManager software questions & answers
Post Reply
Dtuned3
Posts: 8
Joined: Mon Jul 18, 2022 3:42 pm

car wont rev pass 2k while in gear but will stationary

Post by Dtuned3 »

car has a basic set up css ls vtev skunk 2 cams just recently switch over to Bosch 2200cc but car goes into like a decel mode and the datalog shows injector duty cycle go to 0ms car was working fine but no matter what deadtimes i use car has the same issue any help would be appreciated thank you
Attachments
injector issues.s3d
(311.65 KiB) Downloaded 55 times
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: car wont rev pass 2k while in gear but will stationary

Post by Spunkster »

Post a picture of your s300.
Dtuned3
Posts: 8
Joined: Mon Jul 18, 2022 3:42 pm

Re: car wont rev pass 2k while in gear but will stationary

Post by Dtuned3 »

Here is the picture thanks
Attachments
20220718_212240.jpg
20220718_212240.jpg (972.86 KiB) Viewed 719 times
Dtuned3
Posts: 8
Joined: Mon Jul 18, 2022 3:42 pm

Re: car wont rev pass 2k while in gear but will stationary

Post by Dtuned3 »

This also happened the last time i took the car out trying to tune
Attachments
Screenshot_20220718-212844_Facebook.jpg
Screenshot_20220718-212844_Facebook.jpg (868.6 KiB) Viewed 719 times
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: car wont rev pass 2k while in gear but will stationary

Post by Spunkster »

The internal battery has most likely failed. The only option is to upgrade to the version 4 s300. Details and the form can be found at: https://www.hondata.com/downloads/s300v ... e_form.pdf
Dtuned3
Posts: 8
Joined: Mon Jul 18, 2022 3:42 pm

Re: car wont rev pass 2k while in gear but will stationary

Post by Dtuned3 »

thank you sir
Post Reply