injector dead times help 2200 cc dead time car wont rev pass 2k while on load
injector dead times help 2200 cc dead time car wont rev pass 2k while on load
so recently put this build together ls vtec hondata 4 bar 2200cc bosch but ever since car wont go past 2k i recently created a topic and i was pointed i the direction that maybe my s300 had a bad internal battery (v1) i sent it out for the upgrade and now the car has the same issue just lest violent i was able to get a datalog of this but i personally think my dead times or my injector are the issues i have tried every dead time i can possibly find for the these bosch injectors the only this left would be to actually try with a different set of injectors any suggestions would gladly help thanks in advance
- Attachments
-
- 1st test.s3d
- (354.92 KiB) Downloaded 74 times
Re: injector dead times help 2200 cc dead time car wont rev pass 2k while on load
You have not posted the calibration the datalog was made with.
Re: injector dead times help 2200 cc dead time car wont rev pass 2k while on load
this is the calibration
- Attachments
-
- bare map just map and injector.skl
- (54.7 KiB) Downloaded 106 times
Re: injector dead times help 2200 cc dead time car wont rev pass 2k while on load
You have the rev limit set at 2500rpm.