Hondata S300 V3 not uploading

s300 and SManager software questions & answers
Post Reply
DelsolMT
Posts: 1
Joined: Thu Oct 06, 2022 9:09 am

Hondata S300 V3 not uploading

Post by DelsolMT »

Hello,

I purchased a P28 ECU with Hondata S300 v3 installed from Tegiwa. When connecting the ECU with the laptop and car, the following is occurring:

- LED Light of the ECU is flashing red.
- When connecting ECU with Laptop and car with IGNITION OFF, the SManager still reads the ECU as online.
- When connecting ECU with Laptop and car with ignition on, the option to upload and several other options are greyed out.
- In the SManager Information window under Calibration Storage tab there is written on the notes section "Stock US P28 (92-95 D16 Civic Si/EX). My car has a JDM D15B Vtec engine.

I was communicating via emails with Tegiwa on the above issues, but I have been going back and forth for several times and it is becoming really frustrating and am feeling disappointed with Tegiwa's after service. They are saying that the problem may be in the software and not the ECU.

Info on the SManager and Hondata S300 V3:
- Hondata Serial No.: 60607
- Software Version: 2.7.6
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Hondata S300 V3 not uploading

Post by Spunkster »

Tegiwa is not an authorized Hondata dealer. You may want to discuss the issue with CPL Racing in the UK as they are our UK distributor.
svhondajohn661
Posts: 2
Joined: Sun Oct 09, 2022 3:55 am
Location: Bakersfield

Re: Hondata S300 V3 not uploading

Post by svhondajohn661 »

I got the same issue. Smanager will not install into my laptop. Windows 11 will not let it. Says I need x86 or itanium.@3:32 I gave up . Drivers will install. Software will not install.
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Hondata S300 V3 not uploading

Post by Spunkster »

svhondajohn661 wrote: Sun Oct 09, 2022 4:12 am I got the same issue. Smanager will not install into my laptop. Windows 11 will not let it. Says I need x86 or itanium.@3:32 I gave up . Drivers will install. Software will not install.
This is a totally different issue. Please start your own thread and include what processor your laptop has.
svhondajohn661
Posts: 2
Joined: Sun Oct 09, 2022 3:55 am
Location: Bakersfield

Re: Hondata S300 V3 not uploading

Post by svhondajohn661 »

constant red flash
Yankee1up
Posts: 4
Joined: Fri Nov 25, 2022 3:37 am

Re: Hondata S300 V3 not uploading

Post by Yankee1up »

Any fix for this ?
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Hondata S300 V3 not uploading

Post by Spunkster »

Please start your own thread and include complete details.
Post Reply