2013 si with aem cai
-
- Posts: 9
- Joined: Sun Oct 23, 2022 11:06 am
2013 si with aem cai
Have a 2013 si with a aem cai in it.looking for a proper tune setting on the hondata for it.right now I keep getting rich fuel back 1 and bank 1 02 sensor codes with rough idle.any recommendations?
-
- Posts: 9
- Joined: Sun Oct 23, 2022 11:06 am
Re: 2013 si with aem cai
Can someone give me an answer?
Re: 2013 si with aem cai
What calibration have you used?
-
- Posts: 9
- Joined: Sun Oct 23, 2022 11:06 am
Re: 2013 si with aem cai
The maf calibration
Re: 2013 si with aem cai
Have you tried the Hondata reflash?
-
- Posts: 9
- Joined: Sun Oct 23, 2022 11:06 am
Re: 2013 si with aem cai
Yea and it runs the same.I don’t know what else to do.the rpm’s when I’m driving and go into neutral comming to a stop will jump to like 1.5 then to 1 then slowly go below.trying to figure out what to do lol
-
- Posts: 9
- Joined: Sun Oct 23, 2022 11:06 am
Re: 2013 si with aem cai
Is it possible that I have a faulty 02 sensor or maf sensor is dirty?or is it just the wrong tune
Re: 2013 si with aem cai
Does it do this with the OEM intake?
-
- Posts: 9
- Joined: Sun Oct 23, 2022 11:06 am
Re: 2013 si with aem cai
I don’t know.like I said I bought it with the aem in it already but it was running fine I went to reflash it to the stock ecu just to check something out.then I put it to the maf tune and it was running fine nice and smooth then yesterday it shot that rich fuel code now I cleared it and reflashed it but still rpm’s doing the same.
-
- Posts: 9
- Joined: Sun Oct 23, 2022 11:06 am
Re: 2013 si with aem cai
Any other recommendations?
Re: 2013 si with aem cai
Are you still getting an error code?
-
- Posts: 9
- Joined: Sun Oct 23, 2022 11:06 am
Re: 2013 si with aem cai
Yea I keep getting the bank 1 rich code and running rough when idle from it.
Re: 2013 si with aem cai
I would recommend that you get it properly tuned on the dyno with the modifications you have.