Moates obd1 engine sim v3 s300v3

s300 and SManager software questions & answers
Post Reply
365motorsports
Posts: 5
Joined: Mon Nov 28, 2022 11:23 am

Moates obd1 engine sim v3 s300v3

Post by 365motorsports »

I have been trying to get the s300v3 to connect to datalogging in smanager. It connects but when i move load, rpm, tps etc. SManager shows its connected the ecu but none of the values change in the SManager. I can upload and download the calibration so i know the ecu is getting power. I have tested some other chipped obd1 ecus with a different rom editor with the engine sim so i know it work. Just have this issue with Smanager. Any ideas on how to get it to work?
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Moates obd1 engine sim v3 s300v3

Post by Spunkster »

Is J12 cut?
365motorsports
Posts: 5
Joined: Mon Nov 28, 2022 11:23 am

Re: Moates obd1 engine sim v3 s300v3

Post by 365motorsports »

Yes j1 is cut.
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Moates obd1 engine sim v3 s300v3

Post by Spunkster »

I did not ask about J1.
365motorsports
Posts: 5
Joined: Mon Nov 28, 2022 11:23 am

Re: Moates obd1 engine sim v3 s300v3

Post by 365motorsports »

my bad i forgot to hit the 2. j12 is cut
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Moates obd1 engine sim v3 s300v3

Post by Spunkster »

Make sure that the s300 is seated on the pins correctly.
365motorsports
Posts: 5
Joined: Mon Nov 28, 2022 11:23 am

Re: Moates obd1 engine sim v3 s300v3

Post by 365motorsports »

it is seated down on the pins very snug
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Moates obd1 engine sim v3 s300v3

Post by Spunkster »

Does the ECU work in a vehicle?
Post Reply