P0101 error code , engine stalls , high fuel

FK2 Civic Type R 2015-2017, FK8 Civic Type R 2017-2021, FL5 Civic Type R 2023+ and Integra Type S 2024+
Post Reply
Type_Raichu
Posts: 4
Joined: Thu Sep 26, 2024 9:19 pm

P0101 error code , engine stalls , high fuel

Post by Type_Raichu »

New Motor install crate
new PRL P700 turbo with FBO PRL intercooler,PRL Hvi stockm charge pipes, downpipe catted, front pipe
21 ctr

UPDATED to 4.3 latest version Sep 26 2024

checked box, checked mod list still rough idle, heavy fuel smell, wont stay on

daily driver and only car right now, :(
User avatar
Spunkster
Site Admin
Posts: 23346
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: P0101 error code , engine stalls , high fuel

Post by Spunkster »

When you datalog are there any errors?
Type_Raichu
Posts: 4
Joined: Thu Sep 26, 2024 9:19 pm

Re: P0101 error code , engine stalls , high fuel

Post by Type_Raichu »

Just the p0101

Also unsure how to attach data logs here in this forum

Basically stays at 14.70 in all revs

Checked wiring. Checked grounds, checked fuses, cleaned MAF sensor, checked all boost leaks possibilities,

The only thing I'm thinking is replace the MAF sensor

Which I just ordered a new PRL race MAF And a brand new filter to eliminate that possibility
Type_Raichu
Posts: 4
Joined: Thu Sep 26, 2024 9:19 pm

Re: P0101 error code , engine stalls , high fuel

Post by Type_Raichu »

Ok. I'm at my worst with stress and can't think clearly

I'm stuck at 14.7 after new sensor installed and running poorly.

Running out of time for Dallas show and can't get this working.

P0101 is disabled and still throwing code. All boost leaks potential issues are checked and good.

All mech issues checked and just stumped.
jeffx
Posts: 52
Joined: Tue Apr 16, 2019 2:19 pm

Re: P0101 error code , engine stalls , high fuel

Post by jeffx »

To attach files you can simply drag the files directly into the browser while posting in the thread. There's another way to attach logfiles and calibrations: while posting in a thread, there is an 'Add files' button just below the message box and once you click that, you simply navigate to the folder with the files you want to post and select them from there. Post your calibration as well.
Type_Raichu
Posts: 4
Joined: Thu Sep 26, 2024 9:19 pm

Re: P0101 error code , engine stalls , high fuel

Post by Type_Raichu »

Ok, time to close this thread .. or let ppl know. Always check your wiring when your gut says something isnt right. Took me several days and bought a few items to eliminate any issues

The freaking LAF on top of the turbo was only partially plugged in. SMH .. I tugged in the sensor so many times but the snap didn't fully click until I spent hours searching every other possible connection. A simple snap on the top of the connector and ...boost was back. No codes.

SMH. Always check your connection.

Thanks for all ideas as it always comes down the the simplest solution

🫡
Post Reply